Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/95358
PIRA download icon_1.1View/Download Full Text
DC FieldValueLanguage
dc.contributorDepartment of Civil and Environmental Engineeringen_US
dc.creatorNg, CWWen_US
dc.creatorCheng, Qen_US
dc.creatorZhou, Cen_US
dc.creatorAlonso, EEen_US
dc.date.accessioned2022-09-19T01:59:54Z-
dc.date.available2022-09-19T01:59:54Z-
dc.identifier.issn2045-2543en_US
dc.identifier.urihttp://hdl.handle.net/10397/95358-
dc.language.isoenen_US
dc.publisherICE Publishingen_US
dc.rights© ICE Publishing, all rights reserved.en_US
dc.rightsThis is the Author Manuscript of the work. The final published article is available at https://doi.org/10.1680/jgele.16.00059en_US
dc.subjectPartial saturationen_US
dc.subjectSuctionen_US
dc.subjectTemperature effectsen_US
dc.titleVolume changes of an unsaturated clay during heating and coolingen_US
dc.typeJournal/Magazine Articleen_US
dc.identifier.spage192en_US
dc.identifier.epage198en_US
dc.identifier.volume6en_US
dc.identifier.issue3en_US
dc.identifier.doi10.1680/jgele.16.00059en_US
dcterms.abstractThermally induced soil volume changes can have significant influence on many geotechnical structures. So far, research on thermal volume changes of unsaturated soil is very limited, particularly at temperatures lower than typical room temperature (23°C). The principal objective of this study is to investigate the volumetric behaviour of normally consolidated intact and recompacted low-plasticity clay specimens (loess soil) over a wide thermal cycle ranging from 5 to 53°C using a modified double-cell triaxial apparatus. It is found that contractive volumetric strain increases as the temperature increases. During the cooling process, soil volume keeps contracting until the temperature decreases to 5°C. Different from previous studies in the literature on saturated remoulded illite and natural silty clay, a plastic contraction at a much higher rate is observed from 13 to 5°C for both recompacted and intact loess specimens. The plastic volume changes during cooling are probably because cooling-induced contraction of soil particles leads to particle rearrangements in loess. Moreover, the cooling-induced plastic volume change, which only occurs when the cooling temperature is less than a critical value (13°C for the test conditions considered in this study), cannot be captured by the existing thermo-mechanical models, which predict elastic contraction during cooling. A new yield surface (temperature decrease) is proposed to simulate the observed elastoplastic behaviour during cooling.en_US
dcterms.accessRightsopen accessen_US
dcterms.bibliographicCitationGeotechnique letters, Sept 2016, v. 6, no. 3, p. 192-198en_US
dcterms.isPartOfGeotechnique lettersen_US
dcterms.issued2016-09-
dc.identifier.scopus2-s2.0-85011432005-
dc.description.validate202209 bcvcen_US
dc.description.oaAccepted Manuscripten_US
dc.identifier.FolderNumberRGC-B2-1193-
dc.description.fundingSourceRGCen_US
dc.description.fundingSourceOthersen_US
dc.description.fundingTextNational Natural Science Foundation of Chinaen_US
dc.description.pubStatusPublisheden_US
dc.description.oaCategoryGreen (AAM)en_US
Appears in Collections:Journal/Magazine Article
Files in This Item:
File Description SizeFormat 
Volume_Changes_Unsaturated.pdfPre-Published version1.08 MBAdobe PDFView/Open
Open Access Information
Status open access
File Version Final Accepted Manuscript
Access
View full-text via PolyU eLinks SFX Query
Show simple item record

Page views

60
Last Week
0
Last month
Citations as of Apr 14, 2025

Downloads

111
Citations as of Apr 14, 2025

SCOPUSTM   
Citations

36
Citations as of Sep 12, 2025

WEB OF SCIENCETM
Citations

29
Citations as of Oct 10, 2024

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.