Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/115764
DC FieldValueLanguage
dc.contributorDepartment of Civil and Environmental Engineeringen_US
dc.contributorResearch Centre for Nature-based Urban Infrastructure Solutionsen_US
dc.creatorZeng, Ken_US
dc.creatorYin, ZYen_US
dc.creatorLi, Ren_US
dc.creatorJin, YFen_US
dc.date.accessioned2025-10-28T07:04:28Z-
dc.date.available2025-10-28T07:04:28Z-
dc.identifier.issn0032-5910en_US
dc.identifier.urihttp://hdl.handle.net/10397/115764-
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.subjectAccumulated volumetric strainen_US
dc.subjectCyclic behavioren_US
dc.subjectFriction angleen_US
dc.subjectGranular materialen_US
dc.subjectParticle shapeen_US
dc.subjectSurface characteristicsen_US
dc.subjectTriaxial testen_US
dc.titleRole of particle morphology in monotonic and cyclic behavior of granular materials : insights from cerealsen_US
dc.typeJournal/Magazine Articleen_US
dc.identifier.volume466en_US
dc.identifier.doi10.1016/j.powtec.2025.121452en_US
dcterms.abstractParticle morphology, as intrinsic properties of granular materials, significantly affects the mechanical response of granular materials, but little attention has been paid to cyclic response together with monotonic behavior. In this study, six cereals with similar grain sizes but different shapes were selected as testing materials due to their minimal variation in particle morphology. First, three-dimensional particle shapes of six cereals were obtained using X-ray microcomputed tomography (μCT). Then, a series of monotonic and cyclic triaxial tests were conducted on all cereals with and without staining. The staining could effectively eliminate the surface characteristic differences among six cereals, enabling them to be employed to better investigate particle shape effects. Meanwhile, since the surface characteristics of cereals, such as surface roughness and surface-adhered starch, underwent significant changes after staining, their effects could also be analyzed by comparing the results of cereals before and after staining. Repose angle tests were conducted to investigate changes in the surface roughness of six cereals after staining, which showed that staining had no significant effect on the surface roughness of mung but significantly increased it for all other cereals. Triaxial test results showed that the peak friction angle decreased with increasing particle shape regularity and decreasing surface roughness, while accumulated volumetric strain during cyclic tests decreased under both conditions. Furthermore, the cereals with surface-adhered starch exhibited quite different mechanical behavior than conventional granular materials. The starch bond under confining pressure significantly enhanced their shear strength and reduced their compressibility. However, the specimens experienced an abrupt strength reduction and volume contraction when the deviatoric stress reached the critical threshold of starch bond rupture, which required special attention during the storage and transportation of cereals.en_US
dcterms.accessRightsembargoed accessen_US
dcterms.bibliographicCitationPowder technology, Dec. 2025, v. 466, 121452en_US
dcterms.isPartOfPowder technologyen_US
dcterms.issued2025-12-
dc.identifier.scopus2-s2.0-105011712913-
dc.identifier.eissn1873-328Xen_US
dc.identifier.artn121452en_US
dc.description.validate202510 bcelen_US
dc.description.oaNot applicableen_US
dc.identifier.SubFormIDG000306/2025-08-
dc.description.fundingSourceRGCen_US
dc.description.fundingTextThis work was supported by the general research fund of the Research Grants Council (RGC) of the Hong Kong Special Administrative Region Government (HKSARG) of China (grant No. 15229223 , 15227923 , 15226322 , 15220221 ).en_US
dc.description.pubStatusPublisheden_US
dc.date.embargo2027-12-31en_US
dc.description.oaCategoryGreen (AAM)en_US
Appears in Collections:Journal/Magazine Article
Open Access Information
Status embargoed access
Embargo End Date 2027-12-31
Access
View full-text via PolyU eLinks SFX Query
Show simple item record

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.