Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/112150
PIRA download icon_1.1View/Download Full Text
Title: An improved time series SAR interferometry (TSInSAR) for investigating earthquake-induced active unstable slopes (AUS) in Pakistan
Authors: Shahzad, N 
Din, X 
Issue Date: 2024
Source: International journal of remote sensing, 2024, v. 45, no. 18, p. 6342-6371
Abstract: Time series interferometric SAR (TSInSAR) techniques face challenges related to the availability of highly coherent point targets in non-urban, vegetated, and mountainous regions. In this study, we tested an improved TSInSAR approach with the help of distributed scatterers (DS) detected through the fast statistically homogeneous pixel selection (faSHP) approach and jointly processed with persistent scatterers (PS) within the interferometric point target analysis (IPTA) framework. The method is applied to a seismically active and highly gradient terrain to investigate the earthquake-induced active unstable slopes (AUS) in the Muzaffarabad-Balakot region of northern Pakistan, particularly using sixteen PALSAR-2 images acquired between October 2014 and May 2020. However, its effectiveness was also assessed by using Sentinel-1 data from the same time period. The quantitative assessment showed the effectiveness of the method in delineating the sliding surfaces of the unstable slopes and achieving approximately four times higher point density as compared to the standard PSI approach when applied to PALSAR-2 data and approximately nine times higher point targets when Sentinel-1 data is used. Exhibiting an average deformation rate varying between −40 mm yr−1 and 20 mm yr−1 along the line of sight (LOS) direction, the obtained results from PALSAR-2 data revealed the existence of 451 AUS in the region. The study also reports the discovery of a giant destabilized slope (~2.30 sq. km) located near Patika Village along the Neelam River. The majority of these unstable slopes are found at altitudes above 780 m, with slope angles ranging from 15 to 50 degrees. The study also found a significant correlation between deformation patterns and local precipitation. The rainwater gradually penetrates into the joints and cracks, accelerating the processes of deformation and slope failure. The research and its findings could help decision-making entities by providing first-hand information for managing the risks associated with slope failure.
Keywords: Deformation modelling
Distributed scatterers (DS)
Interferometric point targetanalysis (IPTA)
Persistent scatterers (PS)
Time-series interferometric synthetic aperture radar(TSInSAR)
Unstable slope
Publisher: Taylor & Francis
Journal: International journal of remote sensing 
ISSN: 0143-1161
EISSN: 1366-5901
DOI: 10.1080/01431161.2024.2391106
Rights: © 2024 The Hong Kong Polytechnic University. Published by Informa UK Limited, trading as Taylor & Francis Group. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The terms on which this article has been published allow the posting of the Accepted Manuscript in a repository by the author(s) or with their consent.
The following publication Shahzad, N., & Ding, X. (2024). An improved time series SAR interferometry (TSInSAR) for investigating earthquake-induced active unstable slopes (AUS) in Pakistan. International Journal of Remote Sensing, 45(18), 6342–6371 is available at https://doi.org/10.1080/01431161.2024.2391106.
Appears in Collections:Journal/Magazine Article

Files in This Item:
File Description SizeFormat 
Shahzad_Improved_Time_Series.pdf37.49 MBAdobe PDFView/Open
Open Access Information
Status open access
File Version Version of Record
Access
View full-text via PolyU eLinks SFX Query
Show full item record

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.