Please use this identifier to cite or link to this item:
http://hdl.handle.net/10397/107380
Title: | Crystal plasticity-based analysis and modelling of grain size and strain path dependent micro-scaled deformation mechanisms of ultra-thin sheet metals | Authors: | Xu, Z Zhang, R Peng, L Fu, MW |
Issue Date: | Sep-2023 | Source: | International journal of plasticity, Sept 2023, v. 168, 103696 | Abstract: | Multi-stage microforming is increasingly used in manufacturing of the miniaturized parts with complex structures and geometries. Optimization design of this type of manufacturing process, however, is still challenging due to its unknown intrinsic nature of the process. In the multi-stage deformation and microforming, the size effect (SE), the strain path change (SPC), and the intragranularly misoriented grain boundary (IMGB) generated in previous forming stage, are the main factors governing the deformation behaviors of ultra-thin sheets. To gain thorough insights into their influences on deformation and elucidate the associated micro-scaled mechanisms, SS 316L ultra-thin sheets with the thickness of 0.1 mm and different mean grain sizes ( d) were used for two-stage tensile tests under the conditions with distinct pre-strain θ SPC ε ε pre and intersection angle (the angle between the previous loading direction and subsequent one). Mechanical tests reveal that increasing pre and θ SPC reduces the yield stress and hardening rate in SPC tension, but this reduction gets smaller after increasing d. This is because more IMGBs with complex pattern are formed in relatively large grains, raising the permanent deformation resistance inside grains in subsequent tension. To model the IMGB-induced hardening, the SPC-induced softening, and the SE-induced concurrent facilitations to the hardening and softening, an enhanced crystal plasticity constitutive relation was established. The physical essence that IMGB obstructs dislocation movement, is used to model the IMGB-induced hardening based on the interactions between the main slip planes and IMGBs. The hardening facilitation caused by increasing grain size is implicitly incorporated in determining the saturated slip resistance. Modelling of the SPC-induced softening is based on the high Schmid factor grain fraction and its influences are governed by pre- strain and the defined SPC parameter. The softening facilitation caused by coarsening grains is modelled in establishing the initial slip resistance in SPC deformation. The proposed simulation procedure and constitutive relationship help with accurately predicting the mechanical response and microstructure evolution in micro-scaled SPC deformation, and also provide a basis for modelling and design of the multi-stage microforming of complex miniaturized parts. | Keywords: | Crystal plasticity Intragranularly misoriented grain boundary Micro-scaled deformation Size effect Strain path change |
Publisher: | Elsevier Ltd | Journal: | International journal of plasticity | ISSN: | 0749-6419 | EISSN: | 1879-2154 | DOI: | 10.1016/j.ijplas.2023.103696 |
Appears in Collections: | Journal/Magazine Article |
Show full item record
Page views
9
Citations as of Jun 30, 2024
SCOPUSTM
Citations
2
Citations as of Jun 21, 2024
WEB OF SCIENCETM
Citations
2
Citations as of Jun 27, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.