Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/91029
Title: Experimental and numerical investigations on pre-twisted steel box-section columns
Authors: Zhou, F
Cai, Y 
Xu, JF
Chen, Y
Chen, Y
Issue Date: 1-Nov-2021
Source: Engineering structures, 1 Nov. 2021, v. 246, 12996
Abstract: Experimental and numerical investigations on pre-twisted steel box-section columns are presented in this paper. A series of tests was conducted to investigate the effects of pre-twisted angle ratio on the compressive behaviour of steel box-section columns. The pre-twisted angle ratios of 3°/m and 15°/m were considered in the design of column specimens. The column specimens had effective lengths of 1.5 m and 4.0 m, and cross-section dimensions of 280 × 100 (depth × width) mm and 350 × 120 mm. A non-linear finite element model (FEM) considering geometric imperfections was developed. The results from the finite element analysis were compared with those from the column tests in terms of ultimate loads, failure modes and load-deformation curves. After successful verification, the FEM was employed to conduct an extensive parametric study on the structural behaviour of pre-twisted steel box-section columns. The key parameters in the parametric study included the pre-twisted angle ratios, ratios of depth to width in cross section, effective column lengths and end boundary conditions. It was shown that the pre-twisted angle ratios had little effect on the axial capacity, initial stiffness and lateral deformation capacity of shorter columns that failed by plastic yielding; however, more significant effects were found for the longer columns that failed by elastic flexural buckling. Theoretical analysis on the elastic buckling of pre-twisted steel box-section columns was conducted. Based on which, the formula for the buckling coefficient (reduction factor) was proposed that was suitable for the prediction of ultimate strength of pre-twisted steel box-section column.
Keywords: Experimental investigation
Finite element analysis
Pre-twisted column
Steel box-section
Ultimate load
Publisher: Pergamon Press
Journal: Engineering structures 
ISSN: 0141-0296
EISSN: 1873-7323
DOI: 10.1016/j.engstruct.2021.112996
Appears in Collections:Journal/Magazine Article

Open Access Information
Status embargoed access
Embargo End Date 2023-11-01
Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page views

49
Citations as of May 15, 2022

SCOPUSTM   
Citations

1
Citations as of May 12, 2022

WEB OF SCIENCETM
Citations

1
Citations as of May 12, 2022

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.