Please use this identifier to cite or link to this item:
http://hdl.handle.net/10397/91150
DC Field | Value | Language |
---|---|---|
dc.contributor | Department of Land Surveying and Geo-Informatics | - |
dc.creator | Wang, RJ | - |
dc.creator | Shi, WZ | - |
dc.creator | Liu, XL | - |
dc.creator | Li, ZY | - |
dc.date.accessioned | 2021-09-09T03:40:11Z | - |
dc.date.available | 2021-09-09T03:40:11Z | - |
dc.identifier.uri | http://hdl.handle.net/10397/91150 | - |
dc.language.iso | en | en_US |
dc.publisher | Molecular Diversity Preservation International (MDPI) | en_US |
dc.rights | © 2020 by the authors. Licensee MDPI, Basel, Switzerland. | en_US |
dc.rights | This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). | en_US |
dc.rights | The following publication Wang, R.; Shi, W.; Liu, X.; Li, Z. An Adaptive Cutoff Frequency Selection Approach for Fast Fourier Transform Method and Its Application into Short-Term Traffic Flow Forecasting. ISPRS Int. J. Geo-Inf. 2020, 9, 731 is available at https://doi.org/10.3390/ijgi9120731 | en_US |
dc.subject | Sequential data assimilation system | en_US |
dc.subject | Noises separation | en_US |
dc.subject | Fast Fourier transform method | en_US |
dc.subject | Cutoff frequency | en_US |
dc.title | An adaptive cutoff frequency selection approach for fast fourier transform method and its application into short-term traffic flow forecasting | en_US |
dc.type | Journal/Magazine Article | en_US |
dc.identifier.volume | 9 | - |
dc.identifier.issue | 12 | - |
dc.identifier.doi | 10.3390/ijgi9120731 | - |
dcterms.abstract | Historical measurements are usually used to build assimilation models in sequential data assimilation (S-DA) systems. However, they are always disturbed by local noises. Simultaneously, the accuracy of assimilation model construction and assimilation forecasting results will be affected. The fast Fourier transform (FFT) method can be used to acquire de-noised historical traffic flow measurements to reduce the influence of local noises on constructed assimilation models and improve the accuracy of assimilation results. In the practical signal de-noising applications, the FFT method is commonly used to de-noise the noisy signal with known noise frequency. However, knowing the noise frequency is difficult. Thus, a proper cutoff frequency should be chosen to separate high-frequency information caused by noises from the low-frequency part of useful signals under the unknown noise frequency. If the cutoff frequency is too high, too much noisy information will be treated as useful information. Conversely, if the cutoff frequency is too low, part of the useful information will be lost. To solve this problem, this paper proposes an adaptive cutoff frequency selection (A-CFS) method based on cross-validation. The proposed method can determine a proper cutoff frequency and ensure the quality of de-noised outputs for a given dataset using the FFT method without noise frequency information. Experimental results of real-world traffic flow data measurements in a sub-area of a highway near Birmingham, England, demonstrate the superior performance of the proposed A-CFS method in noisy information separation using the FFT method. The differences between true and predicted traffic flow values are evaluated using the mean absolute error (MAE), root mean square error (RMSE), and mean absolute percentage (MAPE) values. Compared to the results of the two commonly used de-noising methods, i.e., discrete wavelet transform (DWT) and ensemble empirical mode decomposition (EEMD) methods, the short-term traffic flow forecasting results of the proposed A-CFS method are much more reliable. In terms of the MAE value, the average relative improvements of the assimilation model built using the proposed method are 19.26%, 3.47%, and 4.25%, compared to the model built using raw data, DWT method, and EEMD method, respectively; the corresponding average relative improvements in RMSE are 19.05%, 5.36%, and 3.02%, respectively; lastly, the corresponding average relative improvements in MAPE are 18.88%, 2.83%, and 2.28%, respectively. The test results show that the proposed method is effective in separating noises from historical measurements and can improve the accuracy of assimilation model construction and assimilation forecasting results. | - |
dcterms.accessRights | open access | en_US |
dcterms.bibliographicCitation | ISPRS international journal of geo-information, Dec. 2020, v. 9, no. 12, 731 | - |
dcterms.isPartOf | ISPRS international journal of geo-information | - |
dcterms.issued | 2020-12 | - |
dc.identifier.isi | WOS:000602119300001 | - |
dc.identifier.eissn | 2220-9964 | - |
dc.identifier.artn | 731 | - |
dc.description.validate | 202109 bchy | - |
dc.description.oa | Version of Record | en_US |
dc.identifier.FolderNumber | OA_Scopus/WOS | en_US |
dc.description.pubStatus | Published | en_US |
Appears in Collections: | Journal/Magazine Article |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Wang_adaptive_cutoff_frequency.pdf | 71.68 MB | Adobe PDF | View/Open |
Page views
74
Last Week
0
0
Last month
Citations as of May 12, 2024
Downloads
19
Citations as of May 12, 2024
SCOPUSTM
Citations
3
Citations as of May 17, 2024
WEB OF SCIENCETM
Citations
3
Citations as of May 16, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.