Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/64457
Title: Investigation on error factor of injection molding plastic for freeform optics
Other Titles: 自由曲面光學透鏡注射成型誤差因素研究
Authors: To, S 
Wang, EQ
Lee, WB 
Cheung, CF 
Keywords: Optical technology and instrument
Freeform optics
Plastic lens
Error factor of injection molding
Issue Date: 2007
Publisher: 中國學術期刊 (光盤版) 電子雜誌社
Source: 應用光學 (Journal of applied optics), 2007, v. 28, no. 6, p. 684-688 How to cite?
Journal: 應用光學 (Journal of applied optics) 
Abstract: The error factor of injection molding has a direct effect on the quality of a plastic freeform optics.In the process of injection molding,the combination of injection parameters and the injection process control significantly affects the error of molded plastics.In order to obtain higher precision plastic optical components,this paper focused on some key parameters such as the temperature of mold and injected material,injection pressure, holding pressure and holding time,and analyzed their effect on the quality of injected part.The theoretical research was proved by the experiments.The result indicates that,the shrinkage rate of volume is reduced,and the form and surface accuracy is improved by increasing the temperature of injection and mold,the pressure of injection and holding pressure.Thus,the precision plastic optical components can be obtained with the error of less than 0.1μm.
URI: http://hdl.handle.net/10397/64457
ISSN: 1002-2082
Rights: © 2007 中国学术期刊电子杂志出版社。本内容的使用仅限于教育、科研之目的。
© 2007 China Academic Journal Electronic Publishing House. It is to be used strictly for educational and research purposes.
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

13
Last Week
2
Last month
Checked on Aug 13, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.