Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/60223
Title: Microbridge method determining the mechanical properties of low stress LPCVD silicon nitride film and its error analysis
Other Titles: 微桥法研究低应力氮化硅力学特性及误差分析
Authors: Zong, DG
Wang, ZK
Lu, DR
Ong, CW 
Keywords: Micro-electro-mechanical system (MEMS)
Microbridge
Low pressure chemical vapour deposited (LPCVD)
Silicon Nitride
Elastic modulus
Residual stress
Bending strength
Issue Date: 2003
Publisher: 中國學術期刊 (光盤版) 電子雜誌社
Source: 机械强度 (Journal of mechanical strength), 2003, v. 25, no. 4, p. 395-400 How to cite?
Journal: 机械强度 (Journal of mechanical strength) 
Abstract: 用微机械悬桥法研究低应力氮化硅薄膜的力学性能。对符合弹性验则的微桥进行测试 ,在考虑衬底变形的基础上 ,利用最小二乘法对其载荷—挠度曲线进行拟合 ,得到低应力lowpressurechemicalvapourdeposited (LPCVD)氮化硅的弹性模量为 3 14 .0GPa± 2 9.2GPa ,残余应力为 2 65 .0MPa± 3 4.1MPa。探讨梯形横截面对弯曲强度计算和破坏发生位置的影响 ,得到低应力氮化硅的弯曲强度为 6.9GPa± 1.1GPa。对微桥法测量误差的分析表明 ,衬底变形、微桥长度和厚度的测量精度对最终力学特性的拟合结果影响最大
The mechanical properties of MEMS materials have attracted many efforts during these years. Several methods were developed, yet the measured results varied. The mechanical properties of low stress low pressure chemical vapour deposited (LPCVD) Silicon nitride film was investigated by the microbridge method using a wedge tip under the nanoindentor. An elastic checking criterion was proposed and carried out to screen out unelastic microbridge samples. With the consideration of the substrate deformation and cross-section of the microbridge, theoretical analysis is conducted on the microbridge deflection. From the least square fitting process, the elastic modulus is evaluated to be 314.0?GPa±29.2?GPa, while the residual stress and the bending strength are 265.0?MPa±34.1?MPa and 6.9?GPa±1.1?GPa, respectively. The error analysis of the microbridge method shows that the substrate deformation, the length and thickness measurement of the micro bridge influence the regressed results greatly. 还原
URI: http://hdl.handle.net/10397/60223
ISSN: 1001-9669
Rights: © 2003 中国学术期刊电子杂志出版社。本内容的使用仅限于教育、科研之目的。
© 2003 China Academic Journal Electronic Publishing House. It is to be used strictly for educational and research purposes.
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

21
Last Week
1
Last month
Checked on Aug 13, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.