Investigation on local monitoring paradigms of in-situ conformally fabricated piezopolymer coating-based array transducers : ultrasonic bulk waves and local ultrasonic resonances

Abstract

Realistic structures with complex features have been intricate challenges for structural health monitoring (SHM) with permanently installed transducers. Poor conformability of conventional rigid and brittle piezoceramic wafers is a typical issue of applications on surfaces with complex geometry. Moreover, the accompanied high-stress concentration requires high-sensitivity defect detection which is difficult to achieve with large-area monitoring methods like lamb waves at tens to hundreds kHz. Previously, in-situ conformally fabricated piezopolymer coating-based array transducers (PCATs) have been developed to build large-area, lightweight, flexible, and tunable Lamb wave networks. In this study, two novel local monitoring methods were investigated with PCATs, namely ultrasonic bulk wave array inspection and local ultrasonic resonance spectroscopy. For thick structures, ultrasonic bulk waves were generated and detected by PCATs with broadband operating frequencies (1–10 MHz) and flexible array parameters. Simulation tools and imaging algorithms of array inspection in non-destructive testing (NDT) were well implemented based on the analogous directivity pattern and normal-pressure coupling mechanism. As proof of concept, PCATs were applied on example structures with flat, concave, and convex surfaces for internal defect imaging. For thin-walled and/or multilayer structures, PCATs were used to measure local ultrasonic resonances, comparable to conventional non-contact methods. With negligible influence on local mechanical properties and broadband frequency response, multiple resonance peaks from 0 to 25 MHz were identified as zero group velocity (ZGV) Lamb modes and thickness vibration modes of host structures, which can be used as damage indices for local monitoring of corrosion, delamination, stiffness degradation, etc. Through embracing advanced NDT techniques with PCATs, high-sensitivity and quantitative local monitoring could be achieved with conformal networks, offering the possibility to integrate with large-area monitoring as multi-scale SHM for complex structures.