Please use this identifier to cite or link to this item:
Title: Fabrication and characterization of all oxide P-N junction diodes
Authors: Zhuang, Lin
Degree: Ph.D.
Issue Date: 2007
Abstract: We have grown ZnO and MgO mixed oxide thin films by pulsed laser deposition. Most other similar work reported in the open literature so far involved preparing wurtzite structured MgxZn1-xO (w-MZO) films on sapphire substrates with x<0.4. We argue that the cubic form of ZnO, including cubic MgxZn1-xO (c-MZO) could be useful as transparent conducting oxide (TCO), n-type or p-type doped semiconducting oxide, wide bandgap UV detector and dilute magnetic semiconductor (DMS) that can be matched with and grown on many other cubic oxides and perovskites to form interesting devices. By the use of single crystal substrate of matched cubic structures, such as MgO and LaAlO3 (LAO), we have demonstrated that cubic MgxZn1-xO thin films even with x=0.57, representing maximum reported solubility of Zn in MgO, can be stabilized under normal ambient. High quality homoepitaxially and heteroepitaxially grown c-MZO films on MgO and LAO respectively have also been obtained. MZO is a wide bandgap material. Its absorption band edge shifts deep into UV with increased MgO content. Indium doped c-MZO (In-MZO) thin films show typical n-type semiconducting properties. Electrical conductivity at room temperature as high as 102 S cm-1 has been achieved for samples with In 8 at.% doping. Yet they remain optically transparent over the whole visible spectrum. Thus they become desirable n-type TCO. Li-doped NiO (Li0.15Ni0.85O, LNO), on the other hand, is a p-type conductor with good optical transmittance. We have fabricated a number of optical transparent all-oxide p-n junctions based on p-LNO/n-Nb doped SrTiO3 single crystal substrate, p-LNO/n-ZnO(wurtzite) and p-LNO/n-In-MZO. Their structural qualities have been studied and excellent heteroepitaxial relationships have been demonstrated. The results of our present investigation provide affirmative evidence for using all-oxide to develop p-n diode junction devices. In particular the advantages of utilizing the diversified properties of oxide such as wide bandgap, good visible/UV transmittance, potential DMS and stability at high temperature can be realized in these junction diodes. We have also illustrated that c-MZO is a very good base material for fabricating all-oxide p-n junction diodes.
Subjects: Hong Kong Polytechnic University -- Dissertations.
Diodes, Semiconductor.
Metal oxide semiconductors.
Pages: xxv, 202 leaves : ill. ; 31 cm.
Appears in Collections:Thesis

Show full item record

Page views

Last Week
Last month
Citations as of Jun 4, 2023

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.