Please use this identifier to cite or link to this item:
http://hdl.handle.net/10397/84823
DC Field | Value | Language |
---|---|---|
dc.contributor | Department of Civil and Structural Engineering | - |
dc.creator | Poon, Wai-yin Sam | - |
dc.identifier.uri | https://theses.lib.polyu.edu.hk/handle/200/2834 | - |
dc.language.iso | English | - |
dc.title | Effect of anti-symmetric mode on dynamic snap-through of curved beam | - |
dc.type | Thesis | - |
dcterms.abstract | It is well known that the static stability of the initial symmetric buckled mode is significant affected by the onset of anti-symmetric displacement, but the dynamic effects of anti-symmetric modes on dynamic snap-through motion are less understood. The purpose of this investigation is to study the anti-symmetric response of a clamped-clamped buckled beam that is subjected to symmetric sinusoidal excitation. Using the two-mode equations with nonlinear coupling, the autoparametric response of the antisymmetric mode was solved with the aid of Runge-Kutta (RK-4) numerical integration method. The effects of the anti-symmetric mode of vibration on the dynamic snap-through motion were studied. Analytical and numerical studies were also carried out to explore the mechanism of the snap-through motion. Numerical experiments yielded the instability boundaries of dynamic snap-through motion for both single mode and two-mode modeling. Experimental results for a buckled beam were obtained by base excitation with a 6000 N shaker. The measurement of the anti-symmetric modes could be separated from the symmetric mode by special configuration of the strain gauge sensor systems. The analysis results show various characteristic features of phenomenon: (a) autoparametric responses occurred for large static buckled shape when the resonance frequency of symmetric mode was about twice that of anti-symmetric mode; (b) autoparametric responses were dominant at frequency half of the excitation; (c) autoparametric responses of anti-symmetric modes could be as high as the symmetric mode even though the excitation force was symmetric; and (d) autoparametric responses decrease the excitation force that is required to initiate dynamic snap-through motion. A comparison of the simulation results and the experimentally measured data yields excellent results and demonstrates the effectiveness of the modeling approach. | - |
dcterms.accessRights | open access | - |
dcterms.educationLevel | Ph.D. | - |
dcterms.extent | iii, 237 leaves : ill. (some col.) ; 30 cm | - |
dcterms.issued | 2004 | - |
dcterms.LCSH | Hong Kong Polytechnic University -- Dissertations | - |
dcterms.LCSH | Structural dynamics | - |
dcterms.LCSH | Girders -- Vibration | - |
Appears in Collections: | Thesis |
Access
View full-text via https://theses.lib.polyu.edu.hk/handle/200/2834
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.