Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/86065
Title: Model predictive hover control and transition optimization for a tail-sitter unmanned aerial vehicle
Authors: Li, Boyang
Degree: Ph.D.
Issue Date: 2018
Abstract: Unmanned Aerial Vehicles (UAVs) are playing more and more important roles in current society. They can not only be used for entertainment, but also execute missions such as surveillance, cargo delivery, geographic survey, etc. Tail-sitter UAV, one of the configurations that can vertically take off and land (VTOL), is a promising high efficient UAV configuration that can be adopted in high-density urban areas. The main object of this thesis is to improve the hovering and transition performance of tail-sitter UAV system, by studying the key technologies including modeling, model predictive control, and optimal transition trajectory. First of all, the quad-rotor tail-sitter UAV prototype 'PolyU Plus Tail-sitter' (PPT) is designed and built according to the requirement of urban cargo delivery missions. The 'plus' flying-wing configuration is selected due to the structural simplicity, high aerodynamic efficiency, and actuator reliability. Digital model of the UAV is built up for control simulation and performance analysis. The developed simulation model can reflect the main dynamic characteristics of the UAV and is able to be used as real-time simulation platform. Then, the cascaded two-loop model predictive controller (MPC) for hover flight is developed based on linearized state-space model. The measured and unmeasured disturbance are introduced into the augmented dynamic model to improve the tracking and disturbance rejection performance. The controllers are tuned and verified in the hardware-in-loop (HIL) simulation environment and then implemented to an onboard flight computer for real-time execution in the indoor VICON environment. The simulation and experimental results indicates that the proposed MPC controller has good tracking and position holding capability against disturbance such as prevailing and gusty winds. Finally, both the forward and back transition trajectories are optimized according to the minimized energy costs. The simplified 3-DOF longitudinal model is used as the dynamic constraint. The transition optimization problem is transcript into a non-linear programming (NLP) problem and solved by collocation methods. Simulation with Gazebo simulator and outdoor flight experiments are carried out with the optimized transition trajectories. The simulation and experimental results show that the optimized transition strategy enable both the forward and back transitions with less time, less height change, and energy consumption compared with traditional linear transition method.
Subjects: Hong Kong Polytechnic University -- Dissertations
Drone aircraft -- Control systems
Pages: xix, 115 pages : color illustrations
Appears in Collections:Thesis

Show full item record

Page views

55
Last Week
2
Last month
Citations as of Mar 24, 2024

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.