Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/9733
Title: FEM analysis of axial compressive bearing capacities of cut cold-formed steel stub columns with c-section
Authors: Lam, SS 
Chung, KF 
Wang, XP
Keywords: Axial compressive bearing capacity
C-section
Cold-formed steel
Cut stub columns
FEM
Issue Date: 2006
Publisher: 武漢理工大學學報編輯部
Source: 武漢理工大學學報 (Journal of Wuhan University of Technology), 2006, v. 28, no. 7, p. 71-74 How to cite?
Journal: 武漢理工大學學報 (Journal of Wuhan University of Technology) 
Abstract: Cutting roll-formed steel C-section to stub columns will produce different extents of cross section distortion along the length and cause additional initial geometric imperfections. Considering material nonlinear, geometric nonlinear and initial geometric imperfections, the axial compressive bearing capacities and failure modes were analyzed with finite element method for cut stub columns with two kinds of C-section. The analysis results were compared with the compressive testing data of the cut stub columns, showing that the failure modes of the two flanges were obvious distortional mode, while those of the webs were local buckling failures. The geometric imperfections caused by cutting reduced the ultimate strength of the fixed-ended stub columns by 7%∼11%.
URI: http://hdl.handle.net/10397/9733
ISSN: 1000-2405
EISSN: 1671-4431
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

SCOPUSTM   
Citations

1
Last Week
1
Last month
Citations as of Sep 17, 2017

Page view(s)

44
Last Week
1
Last month
Checked on Sep 24, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.