Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/81136
PIRA download icon_1.1View/Download Full Text
Title: Material tests of 316L austenitic stainless-clad steel at elevated temperatures
Authors: Bai, RS
Ban, HY
Chung, KF 
Bai, Y
Issue Date: 2018
Source: Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2018), Jun 27-29, 2018, University of Politecnica Valencia, Valencia, Spain 2018, p. 851-855
Abstract: Mechanical properties of stainless-clad ( SC) steel plates at elevated temperatures are key parameters for fire resistant design and numerical simulation analysis of SC steel structures. Compared with pure stainless steel and pure ordinary steel, SC steel not only combines advantages of the two component metals, but may also balance the performance and cost; however, it behaves quite differently in terms of material properties. In order to quantify this performance, tension coupon tests at room as well as elevated temperatures are conducted on the SC steel plate. Based on the test results, failure modes of the tension coupons are analysed, and full-range stress-strain curves are obtained; material properties are accordingly determined and described herein, and analyses are performed on several properties including yield strength, ultimate tensile stress, elastic modulus and elongation after fracture. It is found that with an increase of the temperature, both the elastic modulus and strengths are reduced remarkably. For determining these material properties quantitatively and developing robust constitutive models of the SC steel at elevated temperatures, more test data are needed, and the incorporation of the effects of the clad ratio on the material properties at both room and elevated temperatures is also necessary. The present research outcomes may provide valuable reference for fire design and calculations of the SC steel.
Keywords: Stainless-clad steel
Elevated temperatures
Mechanical properties
Experiment
Publisher: University of Politecnica Valencia
DOI: 10.4995/ASCCS2018.2018.7011
Rights: 2018, Universitat Politècnica de València, CC BY-NC-ND. This work is licensed under a Creative Commons License Attribution-NonComercial-NoDerivatives 4.0 International (https://creativecommons.org/licenses/by-nc-nd/4.0/).
The following publication Bai, R. S., Ban, H. Y., Chung, K. F., & Bai, Y. (2018, June). Material tests of 316L austenitic stainless-clad steel at elevated temperatures. In Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018 (pp. 851-855). Editorial Universitat Politècnica de València is available at https://dx.doi.org/10.4995/ASCCS2018.2018.7011
Appears in Collections:Conference Paper

Files in This Item:
File Description SizeFormat 
Bai_Tests_Austenitic_Steel.pdf773.53 kBAdobe PDFView/Open
Open Access Information
Status open access
File Version Version of Record
Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page views

208
Last Week
4
Last month
Citations as of Mar 24, 2024

Downloads

99
Citations as of Mar 24, 2024

WEB OF SCIENCETM
Citations

1
Citations as of Mar 28, 2024

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.