Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/78121
Title: Numerical analysis for the optimal designs for thermal energy storage systems using phase change material (PCM)
Authors: Fang, Yuhang
Advisors: Niu, Jianlei (BSE)
Deng, Shiming (BSE)
Keywords: Heat storage
Heat storage devices -- Design and construction
Issue Date: 2018
Publisher: The Hong Kong Polytechnic University
Abstract: Using the latent heat of phase change materials (PCM) in latent heat thermal energy storage (LHTES) systems can effectively increase the thermal energy storage capacity while avoiding occupying large volume when using sensible heat of water in stratified water storage (SWS). However, the storage effectiveness of an LHTES can be hindered by low thermal conductivities of PCMs. Previous studies have shown that the insertion of expanded graphite into PCMs could improve their effective thermal conductivity by 50 times (Haillot et al. 2008). Built from the highly developed heat transfer enhancement technique, the work reported in this Thesis systematically analyzed the effect of heat transfer enhancement in PCM and other parameters on the optimal design for the basic unit of a tube-in-tank LHTES system. Firstly, an index of effective energy storage ratio, Est, was proposed to characterize the effective energy storage capacity of an LHTES system with reference to an ideal SWS system at the same volume. Secondly, using a CFD software, the effect of various parameters on Est of an LHTES system was tested. Thirdly, an analytical technique of required heat transfer length was developed from the effectiveness-NTU theory and used to predict the optimal designs for an LHTES system under various conditions. Finally, the effect of charging conditions on the subsequent discharging performance was tested in the optimal designs. The results of the current study demonstrated that the improvement in effective thermal conductivity of a PCM would remarkably enhance the effective energy storage of an LHTES system if other parameters, such as compactness factor for PCM, mass flow rate, tube length of a heat transfer fluid (HTF) and charging conditions, were well designed. Moreover, by enhancing heat transfer in both PCM and HTF, an LHTES could obtain both a high Est and a high COP at little cost of tube materials.
Description: xxii, 111 pages : color illustrations
PolyU Library Call No.: [THS] LG51 .H577M BSE 2018 Fang
URI: http://hdl.handle.net/10397/78121
Rights: All rights reserved.
Appears in Collections:Thesis

Files in This Item:
File Description SizeFormat 
991022144643303411_link.htmFor PolyU Users167 BHTMLView/Open
991022144643303411_pira.pdfFor All Users (Non-printable)4.3 MBAdobe PDFView/Open
Show full item record
PIRA download icon_1.1View/Download Contents

Page view(s)

40
Citations as of Mar 25, 2019

Download(s)

12
Citations as of Mar 25, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.