Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/77623
Title: Numerical simulation of local wall heating and cooling effect on the stability of a hypersonic boundary layer
Authors: Zhao, R 
Wen, CY 
Tian, XD 
Long, TH 
Yuan, W
Keywords: Boundary layer transition
Hypersonic boundary layer
Laminar flow control
Temperature strip
Issue Date: 2018
Publisher: Pergamon Press
Source: International journal of heat and mass transfer, 2018, v. 121, p. 986-998 How to cite?
Journal: International journal of heat and mass transfer 
Abstract: In this study, a numerical investigation of the perturbation evolution in a Mach 6 flat-plate boundary layer with a local heating or cooling strip is presented. The position of the temperature strip is varied while the strip length is constant and approximated to the boundary-layer thickness. Simulations are based on a time-accurate integration of the compressible Navier-Stokes equations, with a small disturbance of fixed frequency triggered via periodic suction-blowing at the plate leading edge. The stability characteristics of the hypersonic boundary layer are interpreted by spatial linear stability theory (LST). The results indicate that the relative location of a local heating/cooling strip and the synchronization point significantly affect Mode S. With respect to the heating-strip cases, the unstable mode is amplified when a heating strip is located upstream of the synchronization point, and the effect is reversed if the heating strip is placed downstream. In a manner opposite to the local heating effect, placing a narrow cooling strip upstream of the synchronization point stabilizes mode S, while the effect is reversed if the cooling strip is put downstream of the synchronization point. Different from previous stability studies on roughness and porous wall, the location of the synchronization point is not fixed, and this is mainly caused by the change to the phase speed of Mode F. The results suggest that an efficient way to stabilize the boundary layer is to put a narrow cooling strip further upstream of the synchronization point, or put a narrow heating strip downstream of the synchronization point.
URI: http://hdl.handle.net/10397/77623
ISSN: 0017-9310
EISSN: 1879-2189
DOI: 10.1016/j.ijheatmasstransfer.2018.01.054
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

SCOPUSTM   
Citations

2
Citations as of Sep 11, 2018

WEB OF SCIENCETM
Citations

1
Citations as of Sep 19, 2018

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.