Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/64423
Title: Laser cladding of SiC-reinforced MMC coatings
Authors: Yang, YQ
Liu, CL
Man, HC 
Zhu, M
Che, XZ
Issue Date: 2001
Publisher: 中国光学学会
Source: Chinese journal of lasers (中国激光. 英文版), 2001, v. 10B, no. s1, p. 29-33 How to cite?
Journal: Chinese journal of lasers (中国激光. 英文版) 
Abstract: Authors have successfully produced SiC reinforced metal matrix composite (MMC) coatings by using a 2 kW Nd: YAG laser on the substrates of 40Cr steel and an Aluminum alloy, and carried out microstructure analysis and performance testing of the coatings. There are two forms of SiC in the experiment: particle and fiber. By adjusting the adding content of SiCp (5%, 20%, 30%, 40%, 50%, 60%) and of SiCf (40%, 50%), evolution of SiC of different forms during laser cladding, existing forms of SiC in cladding layers and affection on hardness of cladding layers are studied. The results show that during laser cladding, SiC of different forms is decompounded partially; with the increasing of the SiC adding content, the quantity of unmelted SiC increases and hardness of cladding layers improves. Comparing the hardness of SiC particle reinforced coating with the SiC fiber reinforced one, the reinforcing effecting of SiC fiber is better; the main reasons that bring hardness remarkable improvement are disperse reinforcement of un-melt SiC and precipitation FeSiC, and solution reinforcement of decompounded Si, C.
URI: http://hdl.handle.net/10397/64423
ISSN: 1004-2822
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

10
Last Week
1
Last month
Checked on Aug 13, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.