Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/5615
PIRA download icon_1.1View/Download Full Text
DC FieldValueLanguage
dc.contributorDepartment of Health Technology and Informatics-
dc.creatorQiu, W-
dc.creatorYu, Y-
dc.creatorSun, L-
dc.date.accessioned2014-12-11T08:27:20Z-
dc.date.available2014-12-11T08:27:20Z-
dc.identifier.isbn978-1-4577-0382-9-
dc.identifier.issn1948-5719-
dc.identifier.urihttp://hdl.handle.net/10397/5615-
dc.language.isoenen_US
dc.publisherIEEE Ultrasonics, Ferroelectrics, and Frequency Control Societyen_US
dc.rights©2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.en_US
dc.rightsThe following publication Qiu, W., Yu, Y., & Sun, L. (2010). A programmable, cost-effective, real-time high frequency ultrasound imaging board based on high-speed FPGA. Paper presented at the Proceedings - IEEE Ultrasonics Symposium, 1976-1979 is available at http://dx.doi.org/10.1109/ULTSYM.2010.5935574en_US
dc.subjectFPGAen_US
dc.subjectPCBen_US
dc.subjectHigh frequency ultrasounden_US
dc.subjectProgrammableen_US
dc.subjectReal-timeen_US
dc.titleA programmable, cost-effective, real-time high frequency ultrasound imaging board based on high-speed FPGAen_US
dc.typeConference Paperen_US
dc.identifier.doi10.1109/ULTSYM.2010.5935574-
dcterms.abstractHigh frequency (>20MHz) ultrasound imaging has made it possible to delineate small structures with fine spatial resolution. Previously, a high frequency high frame rate imaging system had been developed for small animal cardiac imaging. This paper presents further development of a programmable, low-cost, real-time high frequency ultrasound imaging board based on high-speed FPGA. Utilization of FPGA facilitates programmable applications with high flexibility. The printed circuit board (PCB) design achieves cost-effectiveness and compactness. The PCI bus interface allows high speed data transfer and real-time imaging. The dedicated front-end electronics showed a minimum detectable signal of 18μV, allowing a 50dB dynamic range at a total gain of 50dB. The high-speed analog to digital converter (ADC) with a typical 10.8 bit ENOB was employed to accomplish high speed data acquisition. Algorithms such as band-pass filter, envelope detection and digital scan converter were implemented in the FPGA with high speed and high flexibility. Finally, wire phantom experiment showed good performance of such a programmable and compact design.-
dcterms.accessRightsopen accessen_US
dcterms.bibliographicCitation2010 IEEE International Ultrasonics Symposium Proceedings : California, October 11-14, 2010, p. 1976-1979-
dcterms.issued2010-10-
dc.identifier.scopus2-s2.0-80054067349-
dc.identifier.rosgroupidr51569-
dc.description.ros2010-2011 > Academic research: refereed > Refereed conference paper-
dc.description.oaAccepted Manuscripten_US
dc.identifier.FolderNumberOA_IR/PIRAen_US
dc.description.pubStatusPublisheden_US
Appears in Collections:Conference Paper
Files in This Item:
File Description SizeFormat 
radBCCBA[1].pdfPre-published version291.72 kBAdobe PDFView/Open
Open Access Information
Status open access
File Version Final Accepted Manuscript
Access
View full-text via PolyU eLinks SFX Query
Show simple item record

Page views

127
Last Week
0
Last month
Citations as of Mar 24, 2024

Downloads

336
Citations as of Mar 24, 2024

SCOPUSTM   
Citations

4
Last Week
0
Last month
0
Citations as of Mar 28, 2024

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.