Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/55230
Title: A technological study of computer-aided laser finishing on cotton-based fabrics
Authors: Hung, On Na
Advisors: Chan, C. K. Allan (ITC)
Kan, C. W. (ITC)
Yuen, C. W. M. (ITC)
Keywords: Cotton fabrics.
Carbon dioxide lasers.
Lasers -- Industrial applications.
Issue Date: 2016
Publisher: The Hong Kong Polytechnic University
Abstract: The purpose of the present study was to investigate the feasibility of applying the CO₂ laser technology to modify the of physical, chemical and color properties of the woven cotton, woven cotton/polyester and knitted cotton fabrics in terms of technological, theoretical and experimental feasibility. The technological possibility of CO₂ laser technology in the textile industry was assessed through evaluating the physical, chemical and color performance of laser treated woven cotton, cotton/polyester and knitted cotton fabrics with two different approaches, i.e. (1) laser treated and then dyed (LD), and (2) dyed first and then laser treated (DL) together with combinations of laser processing variables. It was confirmed that pores and cracks were formed on the laser-treated cotton fibers with their sizes varying with the change of laser power. The change occurred in the cotton/polyester blended fabrics was found different from that of the cotton fibers as they were covered by the melted polyester with uneven flat regions being created. In addition, the yarn count and yarn twist were also found affecting the result of laser treatment in the knitted fabrics. Higher number of pores was found on the yarns with higher yarn count and lower yarn twist. The physical properties of the laser-treated fabrics were altered. Cotton woven fabrics were observed to have better drapability and wrinkle recovery after laser treatment. Stiffness was enhanced after treating the cotton/polyester blended woven fabrics with laser. It was discovered by the FTIR that the hydroxyl groups of the irradiated fabrics were removed after laser treatment. This really could help explain the color fading effect obtained by the laser treatment. In comparison with two different treatment approaches, there were various responses to different textile materials, dyestuffs and density of the laser power used. The DL approach provided a stronger color fading effect when the Reactive Blue 19 was used in the cotton fabrics. As for the cotton/polyester blended fabrics, the LD approach supported a stronger color fading effect when the same dyestuff was used. Different desired effects were successfully obtained using various treatment approaches, treatment setting and textile materials. In conclusion, there is a considerable potential to improve the existing value-added finishing using the CO₂ laser in textile industry with less time, water consumption and cost. However, the textile and color properties of the laser-treated materials are also critical to the finishing effects that can be achieved on the cotton and cotton/polyester blended fabrics.
Description: PolyU Library Call No.: [THS] LG51 .H577P ITC 2016 Hung
xxii, 282 pages :illustrations (some color)
URI: http://hdl.handle.net/10397/55230
Rights: All rights reserved.
Appears in Collections:Thesis

Files in This Item:
File Description SizeFormat 
b28641607_link.htmFor PolyU Users208 BHTMLView/Open
b28641607_ira.pdfFor All Users (Non-printable)7.99 MBAdobe PDFView/Open
Show full item record

Page view(s)

144
Last Week
5
Last month
Checked on Nov 20, 2017

Download(s)

181
Checked on Nov 20, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.