Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/4125
Title: Formability of tailor-welded blanks for rate-dependent materials
Authors: Cheng, Chi-ho
Keywords: Hong Kong Polytechnic University -- Dissertations
Materials
Laser welding
Issue Date: 2010
Publisher: The Hong Kong Polytechnic University
Abstract: The primary objective of the thesis is to carry out a prediction analysis on the formability of tailor-welded blanks (TWBs) for rate-dependent materials. This includes (i) the development of a modified vertex theory for the forming limit prediction of rate-dependent sheet metals, and (ii) the establishment of a systematic approach for the formability analysis of TWBs taking fully into account their structural behaviors and weldment effects. In the study, the modified vertex theory is implemented substantially into the finite element simulation for the process analysis and failure prediction of TWB forming. The scope of the research involves experimental investigations, theoretical modeling and numerical simulations. The study results, including the modified vertex theory and the developed analysis on TWBs, are applicable not only to the TWBs made of rate-dependent material but also to the TWBs made of rate-independent material. First of all, the study was motivated by the apparent discrepancies between the measured forming limit diagrams (FLDs) of rate-dependent sheet metals (e.g., AKDQ steel) and those predicted values using the conventional vertex theory. Strictly speaking, the localized necking criterion based on the conventional vertex theory is only rigorous to the rate-independent strain-hardening metals, such as aluminum alloys. Therefore, in this thesis, a modification to the vertex theory is proposed to extend the capability of forming limit prediction to the rate-dependent metals. This can be achieved by considering the rate-dependent power-hardening material rule in the modified vertex theory. A novel form of quasi-linear stress-strain relation based on the power-hardening rule is analytically derived to model the constitutive behavior of rate-dependent materials. The vertex theory assumes that localized necking of sheet metals occurs simultaneously with the initiation of a vertex on the yield surface. The stress-strain relation of rate-dependent material is then coupled into the vertex theory to deduce the critical conditions for localized necking (i.e., forming limits on both sides of the FLD). The localized necking criteria for rate-independent materials can be considered as a special case of the theory. A typical rate-dependent metal, AKDQ steel, was chosen for the validation of the modified theory. The stress-strain curves of AKDQ were tested on a MTS under different constant strain-rates, covering a wide range of strain-rates from 10⁻⁵/s to 10/s. The material rate-dependency of AKDQ was measured for the calculation of FLD, while the hardening law of AKDQ was found to depend greatly on the strain-rate. Forming limit test was performed for the AKDQ sheets to measure the FLD. The FLD was compared to the prediction based on the modified theory and good agreement was observed. Case studies were also carried out to illustrate the implementation of the modified theory for failure prediction in finite element simulations of the sheet metal forming process. A much better description on the forming performance and failure behavior for the rate-dependent material could therefore be obtained by using the modified theory as a localized necking criterion.
Subsequently, the thesis presents an analysis of the formability of TWBs for rate-dependent materials by applying the modified vertex theory for forming limit prediction. A TWB is composed of several flat metal sheets of different thicknesses or strengths, which are welded together prior to the forming operation. However, the forming performance of a TWB depends critically on its distinctive structural design and the properties of its welded material. Due to the structural nature of TWB, the general formability measures, such as FLD, are not simply applicable to analyzing the formability of TWB. Therefore, a systematic approach for the formability analysis of TWBs by considering the effects of their structure and weldment properties has been proposed here. In this proposed approach, an experimental measurement system was established to acquire the distinctive material properties and rate-dependent mechanical data for each material region in a TWB, especially for the weldment in miniature size. The experimental data were then implemented into the forming simulations of TWB in a general-purposed finite element package. In the simulations, the thickness and geometry of the TWB were modeled concretely, while the weldment and HAZs were also constructed and defined carefully. This was found to be particularly important to those TWBs with weaker weldment properties, which led to a weld failure during forming. The modified vertex theory was, hence, employed to deduce the forming limits of each material in TWB, including the weldment. Once the stress-strain data of selected elements satisfy the localized necking criteria of the modified vertex theory, the critical status and location of localized necking on TWBs could be identified. The modified theory was found to be applicable to both rate-dependent and independent materials, whereas the strain-rate data were involved during the calculation of rate-dependent material. The simulation results were verified with the experimental one using both AKDQ and Al-TWBs for the case studies of rate-dependent and rate-independent materials analysis respectively. Furthermore, investigations of the structural effects (e.g., different thickness combinations, weldment orientations and specimen widths) on the formability of the TWBs were carried out on both types of TWBs.
Description: xxxii, 346, 50 p. : ill. ; 30 cm.
PolyU Library Call No.: [THS] LG51 .H577P ISE 2010 Cheng
URI: http://hdl.handle.net/10397/4125
Rights: All rights reserved.
Appears in Collections:Thesis

Files in This Item:
File Description SizeFormat 
b23926338_link.htmFor PolyU Users 162 BHTMLView/Open
b23926338_ir.pdfFor All Users (Non-printable) 5.39 MBAdobe PDFView/Open
Show full item record

Page view(s)

454
Last Week
2
Last month
Checked on Jan 15, 2017

Download(s)

791
Checked on Jan 15, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.