Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/37606
Title: Fluid dynamics around an inclined cylinder with running water rivulets.
Authors: Alam, MM
Zhou, Y
Keywords: Fluid dynamics
Cylinders
Water
Issue Date: 2006
Source: Proceedings of the ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering, Miami, Florida, USA, July 17–20, 2006, v. 1, paper no. FEDSM2006-98046, p. 395-405 (CD-ROM) How to cite?
Abstract: This paper presents the experimental study of fluid dynamics around an inclined circular cylinder with and without water running over its surface, covering the water rivulet formation, the fluid forces on the cylinder, the near-wake structure and their interrelationships. Two cylinder inclination angles (α) were investigated, i.e., 80° and 55°, respectively, with respect to incident flow. It has been found that water running over the cylinder surface may behave quite differently, depending on the incident flow velocity (U∞ ), which has subsequently a great impact upon fluid dynamics around the cylinder. As such, five flow categories are classified. Category A: one water rivulet was observed, irrespective of α, at the leading stagnation point at a small U∞ . Category B: the rivulet splits into two, symmetrically arranged about the leading stagnation line, once U∞ exceeds a α-dependent critical value. The two rivulets may further switch back to one, and vice versa. Category C: two symmetrical straight rivulets occur constantly. Category D: the two rivulets shift towards the flow separation line with increasing U∞ and oscillate circumferentially. The oscillation reaches significant amplitude when the rivulets occur at about 70° from the leading stagnation point. This increased amplitude is coupled with a rapid climb in the mean and fluctuating drag and lift, fluctuating lift rising by a factor of near 5 at α = 80°. Meanwhile, the flow structure exhibits a marked variation, including a declining Strouhal number, reduced vortex formation length, velocity fluctuation and velocity deficit, improved two-dimensionality of the flow, increased coherence between vortex shedding and fluctuating lift, and dipped fluid damping at the vortex shedding frequency. All these observations point to the occurrence of a ‘lock-in’ phenomenon, i.e. the rivulet oscillation synchronizing with flow separation. Category E: the two rivulets shift further downstream just beyond the separation line; the shear layers behind the rivulets become highly turbulent, resulting in weakened vortex shedding, fluctuating fluid forces and fluctuating wake velocity. Based on the equilibrium of water rivulet weight, aerodynamic pressure and friction force between fluid and surface, analysis is developed to predict the rivulet position on the cylinder, which agrees well with measurements.
URI: http://hdl.handle.net/10397/37606
ISBN: 0-7918-4750-0
0-7918-3783-1 (E-ISBN)
DOI: 10.1115/FEDSM2006-98046
Appears in Collections:Conference Paper

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

19
Last Week
0
Last month
Checked on Sep 17, 2017

Google ScholarTM

Check

Altmetric



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.