Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/34895
Title: Interactions of a center of dilatation and an interface crack in a two-dimensional viscoelastic bimaterial
Authors: Chau, KT 
Wong, RCK
Issue Date: 2009
Publisher: Elsevier
Source: Mechanics of materials, 2009, v. 41, no. 10, p. 1072-1082 How to cite?
Journal: Mechanics of materials
Abstract: This paper derives analytically the stress intensity factors (SIFs) of a frictional interfacial crack in a viscoleastic bimaterial subject to the action of a center of dilatation. The standard linear viscoelastic solid or “three-parameter-viscoelastic-model” is adopted. Using the correspondence principle, the problem is formulated in Laplace transform space. The problem is decomposed into two Auxiliary Problems: (I) a bimaterial containing a center of dilatation; and (II) an interfacial crack in the bimaterial subject to tractions that cancel those induced by the Auxiliary Problem I. Schapery’s direct method is used to obtain the inverse Laplace transform and, in turn, obtain the SIF as a function of time. Creeping tests for the Swiss Central Alps shales have been adopted for viscoelastic parameter calibration. When the bimaterial degenerates into a homogenous material, the SIFs are independent of time. If the medium containing the center of dilatation is stiffer, the long term SIF is larger than the instantaneous SIF; and if the medium containing the center of dilatation is softer, the long term SIF is smaller than the instantaneous SIF. Therefore, short term crack stability does not necessarily rule out long term crack propagation. If the overburden stress and the friction on crack surface are neglected, both modes I and II SIFs are induced at the crack tips. The mode II SIF is, in general, larger than that of mode I. When both friction and overburden pressure are included in the analysis, tensile cracking is unlikely whilst shear cracking remains possible. The maximum mode II SIF strongly depends on the orientation as well as the distance of the center of dilatation from the crack tip. Both overburden pressure and crack face friction decreases chance of crack propagation.
URI: http://hdl.handle.net/10397/34895
ISSN: 0167-6636
DOI: 10.1016/j.mechmat.2009.03.005
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

WEB OF SCIENCETM
Citations

2
Last Week
0
Last month
Citations as of Feb 20, 2017

Page view(s)

9
Last Week
0
Last month
Checked on Feb 19, 2017

Google ScholarTM

Check

Altmetric



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.