Back to results list
Please use this identifier to cite or link to this item:
|Title:||A unified approach for steel and composite beams with web openings||Authors:||Ko, Chi-hang||Keywords:||Hong Kong Polytechnic University -- Dissertations
Building, Iron and steel
Load factor design
|Issue Date:||2002||Publisher:||The Hong Kong Polytechnic University||Abstract:||A unified design method incorporating tee-section approach and perforated section approach is developed. The method provides a harmonized design method for steel beams and composite beams with web openings of various sizes and shapes. Hot rolled or fabricated compact steel sections with symmetric cross-section geometry are covered. No local buckling problem is considered. In the tee-section approach, simple design formulas for the determination of plastic moment resistances of both composite tee-sections and steel tee-sections at the low moment side and the high moment side of the web openings under co-existing axial force and shear force are derived analytically based on plastic stress blocks. The beneficial effect of axial force on the moment resistances is identified. Complete shear-axial-moment interaction curves are produced for the tee-sections. In order to assess the load capacities of beams with web openings, the design formulas from the tee-sections approach are extended for the analyses of the entire perforated sections by considering the equilibrium of forces around the web openings. Moment-shear interaction curves are generated for steel beams with web openings and the results are compared with those obtained from a separate finite element study. Similar moment-shear interaction curves for composite beams with web openings are also produced and discussed. Harmonized design of beams with web openings of different shapes is achieved through the use of equivalent octagonal openings. Transformation expression for steel beams with circular web openings has been proposed. Moment-shear interaction curves for these beams have also been generated and compared with finite element results. Over a hundred test data have been collected from various sources and a comprehensive database is established. Forty test data of composite beams with rectangular web openings, fourteen test data of steel beams with rectangular web openings, and nine test data of steel beams with circular web openings are selected from the database for the calibration of the proposed unified design method with the use of a specifically developed computer program. The proposed unified design method is considered to be straightforward and easy to understand. It may facilitate practicing engineers to take advantages of composite construction to build commercial buildings with improved performance and full integration with building services. Furthermore, based on the step-by-step design procedures provided, engineers will be able to perform quick and practical scheming design on steel and composite beams with large web openings.||Description:||1 v. (various pagings) : ill. ; 30 cm.
PolyU Library Call No.: [THS] LG51 .H577M CSE 2002 Ko
|URI:||http://hdl.handle.net/10397/3453||Rights:||All rights reserved.|
|Appears in Collections:||Thesis|
Show full item record
Files in This Item:
|b16378465_link.htm||For PolyU Users||162 B||HTML||View/Open|
|b16378465_ir.pdf||For All Users (Non-printable)||6.6 MB||Adobe PDF||View/Open|
Citations as of Jun 18, 2018
Citations as of Jun 18, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.