Please use this identifier to cite or link to this item:
Title: Oxygen permeation modeling for Zr0.84Y0.16 O 1.92-La0.8 Sr0.2Cr 0.5Fe 0.5O 3-δ asymmetric membrane made by phase-inversion
Authors: He, W
Liu, JJ
Chen, CS
Ni, M 
Keywords: Asymmetric membrane
Issue Date: 2015
Publisher: Elsevier
Source: Journal of membrane science, 2015, v. 491, p. 90-98 How to cite?
Journal: Journal of Membrane Science 
Abstract: An oxygen permeation model for an asymmetric membrane made by phase-inversion is developed to link the permeation performance directly to measurable variables, such as experimental conditions and geometric parameters. Zr0.84Y0.16O1.92-La0.8Sr0.2Cr0.5Fe0.5O3-δ (YSZ-LSCrF) membrane is selected as representative membrane. The percolation theory is used to describe the effective properties of the composites. Two permeation modes in asymmetric membrane are compared. One mode is oxygen permeation from the Support to the thin Dense layer (SD mode), and the other oxygen permeation flux is the opposite way (DS mode, from dense layer to support). In these two modes, the maximum oxygen permeation rate is achieved at an ionic phase fraction of 0.5 under air/CO gradient. It is also found that it is beneficial for the membrane to obtain higher oxygen permeation flux when DS mode is adopted for the supported membrane. In addition, the surface exchange on lean side in SD mode limits the whole oxygen permeation. The resistances of support layer and dense layer in asymmetric membrane are calculated. The rate-limited step is identified by distribution of these resistances.
ISSN: 0376-7388
DOI: 10.1016/j.memsci.2015.05.026
Appears in Collections:Journal/Magazine Article

View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

Last Week
Last month
Checked on Jun 25, 2017

Google ScholarTM



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.