Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/32146
Title: Effect of plasma pretreatment on the wrinkle-resistance properties of cotton fibers treated with a 1,2,3,4-butanetetracarboxylic acid sodium hypophosulfite system with titanium dioxide as a cocatalyst
Authors: Lam, YL
Kan, CW 
Yuen, CWM
Keywords: Coatings
Crosslinking
Surface modification
Issue Date: 2011
Publisher: Wiley-Blackwell
Source: Journal of applied polymer science, 2011, v. 120, no. 3, p. 1403-1410 How to cite?
Journal: Journal of Applied Polymer Science 
Abstract: A 1,2,3,4-butanetetracarboxylic acid (BTCA)-sodium hypophosulfite (SHP) wrinkle-resistance system played an important role in improving the wrinkle-resistance properties of cotton fibers. In this study, titanium dioxide (TiO(2)) was used as a cocatalyst to further enhance the wrinkle-resistance properties of BTCA-SHP-treated cotton fabrics, that is; those treated with (1) 5% BTCA and 10% SHP; (2) 5% BTCA, 10% SHP, and 0.1% TiO(2); and (3) 5% BTCA, 10% SHP, and 0.2% TiO(2). In addition, the effect of plasma as a pretreatment process on the wrinkle-resistance properties of the three treatment systems was also studied. The experimental results reveal that the wrinkle-resistance properties of cotton fibers were improved after different wrinkle-resistance treatments. In addition, the plasma pretreatment further enhanced the wrinkle-resistance treatments to different extents, depending on the process parameters. Scanning electron microscopy images confirmed that such plasma pretreatment conditions imparted the best crosslinking effect on the cotton fibers. However, the wrinkle-resistance-treated cotton specimens had lower tensile strength and tearing strength values compared to the control sample, whereas the plasma pretreatment and cocatalyst may have compensated for the reduction in the mechanical strength caused by the wrinkle-resistance agents. In this article, the optimum conditions for the plasma pretreatment on the basis of the result of the wrinkle-recovery angle were analyzed with an L(9)(3)(3) orthogonal array testing strategy technique. The results showed that plasma treatment conditions with (1) a 10 mm/s speed, (2) a 0.1 L/min oxygen flow rate, and (3) a 4-mm jet-to-substrate distance together caused a significant improvement in the wrinkle-resistance properties of the cotton fibers treated with the three different BTCA treatments. Moreover, the treatment speed was the dominant factor, followed by jet-to-substrate distance and oxygen flow rate, in affecting the extent of improvement.
URI: http://hdl.handle.net/10397/32146
ISSN: 0021-8995
DOI: 10.1002/app.32960
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

SCOPUSTM   
Citations

5
Last Week
0
Last month
0
Citations as of Apr 30, 2016

WEB OF SCIENCETM
Citations

7
Last Week
0
Last month
0
Citations as of Feb 24, 2017

Page view(s)

14
Last Week
1
Last month
Checked on Feb 19, 2017

Google ScholarTM

Check

Altmetric



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.