Back to results list
Please use this identifier to cite or link to this item:
|Title:||Development of an optimum printing system for digital ink-jet printing||Authors:||Choi, Pui-shan||Keywords:||Hong Kong Polytechnic University -- Dissertations
|Issue Date:||2006||Publisher:||The Hong Kong Polytechnic University||Abstract:||The thesis is concerned with the study of the development of an optimum printing system for digital ink-jet printing using reactive ink on the cotton fabric. Based on the experimental results, it was found that both the contents of pre-treatment print paste, i.e. alginate, urea and alkali, and the post-treatment of steaming time after ink-jet printing played the major role in affecting the final colour yield of the printed cotton fabric. The optimum content of pre-treatment print paste and the proper condition of post-treatment after ink-jet printing were developed to achieve higher colour yield for three primary colours and one black colour with the aid of the response surface experimental design technique. The colour fastness results of the cotton fabric pre-treated by the newly developed ink-jet printing system were similar to those of the commercially available pre-treated cotton fabric. Orthogonal design had been used to determine the effect of pre-treatment print paste and steaming time on the colour yield of ink-jet printed cotton fabric. In addition, fractional factorial design had also been used to study the factors, i.e. sodium alginate, urea, sodium bicarbonate and steaming time. According to the results of the highest colour yield obtained on the cotton fabric, it was found that urea was the dominant factor when compared with other factors. On the other hand, the final colour yield was not only influenced by an individual factor, i.e. amount of alginate used, amount of alkali used, amount of urea used and duration of steaming time, but also due to an interaction effect among these factors.
Characterisation of the reactive inks had been experimentally conducted using various instrumental techniques such as Ultraviolet-Visible Spectroscopy (UV7VIS),Thin-Layer chromatography (TLC) and Infrared Spectroscopy (IR). Based on the results of UV/VIS absorption spectra, the maximum absorbance of the reactive inks studied was determined and hence the respective colour was found. TLC had been used to separate various dye components present in the reactive ink for dye analysis and confirmation. Furthermore, the functional groups and chemical composition of the reactive inks had been deduced by using the IR analysis technique and compared with the chemical structures of known reactive dyes. The feasibility of using chitosan to replace sodium alginate as a thickener in the pre-treatment print paste was studied with the aid of orthogonal design. According to the results of different colour fastness tests and colour appearance measurement, chitosan in principle could work as a pre-treatment print paste thickener after modifying the pre-treatment procedures. In addition, it was found that chitosan could also impart higher anti-bacterial property onto the cotton fabric.
|Description:||xx, 161 leaves : ill. (some col.) ; 30 cm.
PolyU Library Call No.: [THS] LG51 .H577M ITC 2006 Choi
|URI:||http://hdl.handle.net/10397/3157||Rights:||All rights reserved.|
|Appears in Collections:||Thesis|
Show full item record
Files in This Item:
|b20593132_link.htm||For PolyU Users||162 B||HTML||View/Open|
|b20593132_ir.pdf||For All Users (Non-printable)||2.93 MB||Adobe PDF||View/Open|
Citations as of Mar 19, 2018
Citations as of Mar 19, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.