Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/31289
Title: An investigation on surface generation in ultra-precision raster milling
Authors: To, S 
Wang, SJ
Keywords: Surface roughness
Tool path generation
TPG
Ultra-precision raster milling
UPRM
Issue Date: 2011
Source: International journal of nanomanufacturing, 2011, v. 7, no. 3-4, p. 298-310 How to cite?
Journal: International Journal of Nanomanufacturing 
Abstract: This paper studied the factors affecting surface roughness in ultra-precision raster milling (UPRM). Through the investigation on the surface generation mechanism, factors including cutting parameters, tool path generation (TPG) and tool geometry are taken into consideration. A series of cutting experiments is conducted to investigate the influences of three factors including feed direction, depth of cut and entry distance on surface roughness profiles and the surface quality of the ultra-precision raster milled surface. The results show that the surface finishing in horizontal cutting is better than that in vertical cutting and the surface roughness in UPRM can be minimised by selecting the optimal values of depth of cut and entry distance.
URI: http://hdl.handle.net/10397/31289
ISSN: 1746-9392
DOI: 10.1504/IJNM.2011.042469
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

30
Last Week
3
Last month
Checked on Aug 13, 2017

Google ScholarTM

Check

Altmetric



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.