Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/21806
Title: Damage assessment of shear connectors with vibration measurements and power spectral density transmissibility
Authors: Li, J
Hao, H
Xia, Y 
Zhu, HP
Keywords: Condition assessment
Frequency response function
Power spectral density transmissibility
Shear connectors
Slab-on-girder bridge
Structural monitoring
Issue Date: 2015
Publisher: Techno Press
Source: Structural engineering and mechanics, 2015, v. 54, no. 2, p. 257-289 How to cite?
Journal: Structural engineering and mechanics 
Abstract: Shear connectors are generally used to link the slab and girders together in slab-on-girder bridge structures. Damage of shear connectors in such structures will result in shear slippage between the slab and girders, which significantly reduces the load-carrying capacity of the bridge. Because shear connectors are buried inside the structure, routine visual inspection is not able to detect conditions of shear connectors. A few methods have been proposed in the literature to detect the condition of shear connectors based on vibration measurements. This paper proposes a different dynamic condition assessment approach to identify the damage of shear connectors in slab-on-girder bridge structures based on power spectral density transmissibility (PSDT). PSDT formulates the relationship between the auto-spectral densities of two responses in the frequency domain. It can be used to identify shear connector conditions with or without reference data of the undamaged structure (or the baseline). Measured impact force and acceleration responses from hammer tests are analyzed to obtain the frequency response functions at sensor locations by experimental modal analysis. PSDT from the slab response to the girder response is derived with the obtained frequency response functions. PSDT vectors in the undamaged and damaged states can be compared to identify the damage of shear connectors. When the baseline is not available, as in most practical cases, PSDT vectors from the measured response at a reference sensor to those of the slab and girder in the damaged state can be used to detect the damage of shear connectors. Numerical and experimental studies on a concrete slab supported by two steel girders are conducted to investigate the accuracy and efficiency of the proposed approach. Identification results demonstrate that damages of shear connectors are identified accurately and efficiently with and without the baseline. The proposed method is also used to evaluate the conditions of shear connectors in a real composite bridge with in-field testing data.
URI: http://hdl.handle.net/10397/21806
ISSN: 1225-4568
EISSN: 1598-6217
DOI: 10.12989/sem.2015.54.2.257
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

SCOPUSTM   
Citations

5
Last Week
0
Last month
0
Citations as of Sep 9, 2017

Page view(s)

51
Last Week
1
Last month
Checked on Sep 17, 2017

Google ScholarTM

Check

Altmetric



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.