Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/21692
Title: Finite element based small punch testing method for stiffness measurement of polymers
Authors: Chen, X
Tsui, CP 
Tang, CY 
Keywords: Small punch test
Finite element analysis
Elastic modulus
PE
PP
PMMA
Issue Date: 2011
Source: Journal of the Serbian Society For Computational Mechanics, 2011, v. 5, no. 1, p. 27-38 How to cite?
Journal: Journal of the Serbian Society For Computational Mechanics 
Abstract: Mechanical evaluation of a small size specimen is of great necessity. The small punch testing method, as one of the most commonly adopted techniques, was successfully used in determination of elastic modulus for small polymeric specimens. However, the ring support design in this method resulted in an inappropriate specimen-support contact, such as the large contact area and probably the partially non-contact condition, thus lowering the accuracy and sensitivity. In the present study, a finite element based small punch testing method has been developed to determine the elastic moduli of small polymer specimens. In order to measure the initial stiffness, a three-point support based small punch testing device rather than the conventional ring support type was designed and produced for conducting an indentation process. A finite element model for the indentation process was built for determining the elastic moduli of the polymer specimens from the measured initial stiffness through the computed correlation between the elastic modulus and initial stiffness. The differences between the elastic moduli of the PE, PP and PMMA specimens with certain Poisson’s ratios determined by the developed method and those from the standard tensile tests were found to be not statistically significant. With a reduction in the contact area and an elimination of the potential non-contact condition for the specimen-support contact, the developed finite element based method has been shown to be more accurate and sensitive in terms of the determined elastic modulus as compared with the ring-support based small punch testing method. This method may be served as a promising tool for determining the elastic modulus of small polymeric specimens with high sensitivity and accuracy.
URI: http://hdl.handle.net/10397/21692
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

33
Last Week
3
Last month
Checked on Aug 20, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.