Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/20718
Title: Improvement of the diamond turned surface texture by bonnet polishing process
Authors: Wang, P
To, S 
Hui, C
Keywords: Bonnet polishing
Diamond turning
Optical fabrication
Parameters optimize
Surface texture
Issue Date: 2015
Publisher: 中国光学学会
Source: 光学学报 (Acta Optica Sinica), 2015, v. 35, no. 3, 322001 How to cite?
Journal: 光学学报 (Acta Optica Sinica) 
Abstract: Single point diamond turing (SPDT) technique is widely employed in ultra-precision machining of optics. However, the inherent tool marks with strong periodicity induce scattering effects of turned surfaces, significantly deteriorating the optical performances. To suppress the scattering and accordingly achieve optical surface with high quality, the bonnet polishing method is adopted herein to actively modify structures of the residual tool marks. Taking advantage of the Taguchi experiments where the roughness and the power spectral density (PSD) of the polished surface are served as the improving criteria, the optimal polishing parameters are obtained. Polishing experiment is conducted on a fine turned surface by adopting the optimal parameters. The results indicate that the roughness Ra reduces from 3.81 nm to 1.42 nm and the PSDs of surface errors in all the spatial frequencies are also significantly reduced. In addition, the inherent scattering fringes of the original surface are well eliminated, demonstrating the efficiency of the polishing method as well as the optimization method.
URI: http://hdl.handle.net/10397/20718
ISSN: 0253-2239
DOI: 10.3788/AOS201535.0322001
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

Page view(s)

59
Last Week
0
Last month
Checked on Oct 15, 2017

Google ScholarTM

Check

Altmetric



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.