Please use this identifier to cite or link to this item:
http://hdl.handle.net/10397/1643
DC Field | Value | Language |
---|---|---|
dc.contributor | Department of Electrical Engineering | - |
dc.creator | Xue, X | - |
dc.creator | Cheng, KWE | - |
dc.creator | Ho, SL | - |
dc.creator | Cheung, CN | - |
dc.date.accessioned | 2014-12-11T08:26:36Z | - |
dc.date.available | 2014-12-11T08:26:36Z | - |
dc.identifier.isbn | 0-7803-7262-X | - |
dc.identifier.uri | http://hdl.handle.net/10397/1643 | - |
dc.language.iso | en | en_US |
dc.publisher | IEEE | en_US |
dc.rights | © 2002 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. | en_US |
dc.rights | This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. | en_US |
dc.subject | Choppers (circuits) | en_US |
dc.subject | Computer simulation | en_US |
dc.subject | Control system synthesis | en_US |
dc.subject | Diodes | en_US |
dc.subject | Electric network topology | en_US |
dc.subject | Electric power factor | en_US |
dc.subject | Electric power supplies to apparatus | en_US |
dc.subject | Electric windings | en_US |
dc.subject | Parameter estimation | en_US |
dc.subject | Power control | en_US |
dc.subject | Pulse width modulation | en_US |
dc.subject | Voltage control | en_US |
dc.title | Investigation of the effects of the control parameters and outputs on power factor of switched reluctance motor drive systems | en_US |
dc.type | Conference Paper | en_US |
dc.description.otherinformation | Author name used in this publication: X. D. Xue | en_US |
dc.description.otherinformation | Author name used in this publication: K. W. E. Cheng | en_US |
dc.description.otherinformation | Author name used in this publication: S. L. Ho | en_US |
dc.description.otherinformation | Author name used in this publication: N. C. Cheung | en_US |
dc.description.otherinformation | Refereed conference paper | en_US |
dcterms.abstract | In this paper, the authors study the effects of the control parameters and outputs of SRM drive systems on power factor through theoretical, simulation and experimental analyses. The control parameters and outputs include turn-on angle, turn-off angle, input voltage, duty cycle of PWM, speed and torque. The analyses are carried out at three operation modes of SRM drives with voltage source, i.e., single-pulse operation, voltage PWM with hard chopping and voltage PWM with soft chopping. This study reveals completely the relationships between power factor and the above parameters. Moreover, the authors propose the new ideas to improve power factor in SRM drives, based on the analysis results. This study is very important for understanding clearly the parameters to affect on power factor, and the conclusions is quite helpful in designing good controller to improve power factor of SRM drive systems. | - |
dcterms.accessRights | open access | en_US |
dcterms.bibliographicCitation | PESC'02 : 2002 IEEE 33rd Annual Power Electronics Specialists Conference : conference proceedings : Cairns, Queensland, Australia, June 23-27, 2002, p. 1469-1474 | - |
dcterms.issued | 2002 | - |
dc.identifier.isi | WOS:000179806500240 | - |
dc.identifier.scopus | 2-s2.0-0036444874 | - |
dc.relation.ispartofbook | PESC'02 : 2002 IEEE 33rd Annual Power Electronics Specialists Conference : conference proceedings : Cairns, Queensland, Australia, June 23-27, 2002 | - |
dc.relation.conference | IEEE Power Electronics Specialists Conference [PESC] | - |
dc.identifier.rosgroupid | r09906 | - |
dc.description.ros | 2001-2002 > Academic research: refereed > Refereed conference paper | - |
dc.description.oa | Version of Record | en_US |
dc.identifier.FolderNumber | OA_IR/PIRA | en_US |
dc.description.pubStatus | Published | en_US |
Appears in Collections: | Conference Paper |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Effects of control parameters & outputs on power factor of SRM drive systems_02.pdf | 390.49 kB | Adobe PDF | View/Open |
Page views
143
Last Week
1
1
Last month
Citations as of Mar 24, 2024
Downloads
190
Citations as of Mar 24, 2024
SCOPUSTM
Citations
8
Last Week
0
0
Last month
0
0
Citations as of Mar 29, 2024
WEB OF SCIENCETM
Citations
5
Last Week
0
0
Last month
0
0
Citations as of Mar 28, 2024
Google ScholarTM
Check
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.