Please use this identifier to cite or link to this item:
|Title:||Frequency and pulse width modulation for zero-voltage-switching resonant pole inverter|
Pulse width modulation
|Source:||PEDS'99 : proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems : 27-29 July 1999, Hong Kong, p. 1073-1077 How to cite?|
|Abstract:||The resonant pole inverter has the advantages of less component count and simple operation but the disadvantage is that the zero voltage switching can only be achieved for a very small load range. A new modulation technique is proposed to ensure the zero-voltage-switching to be maintained. Comparison of the proposed method to other modulation and inverter is presented. Theoretical and experimental results are shown.|
|Rights:||© 1999 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.|
This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
|Appears in Collections:||Conference Paper|
Show full item record
Files in This Item:
|Frequency & pulse width modulation for zero-voltage -switching resonant pole inverter_99.pdf||378.93 kB||Adobe PDF||View/Open|
Checked on Feb 7, 2016
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.