Please use this identifier to cite or link to this item: http://hdl.handle.net/10397/10210
Title: Axial compression test of cut cold-formed steel stub columns with c-section
Authors: Wang, XP
Chung, KF 
Lam, SS 
Keywords: C-section
Cold-formed steel
Compressive test
Cut
Stub columns
Issue Date: 2005
Publisher: 武漢理工大學學報編輯部
Source: 武漢理工大學學報 (Journal of Wuhan University of Technology), 2005, v. 27, no. 7, p. 57-60 How to cite?
Journal: 武漢理工大學學報 (Journal of Wuhan University of Technology) 
Abstract: Cutting roll-formed steel C-section to stub columns will produce different extent of cross section distortion along the lengths and cause additional initial geometric imperfections. Ten cut stub columns with two rolled-formed steel C-section types were tested under the axial compressive load. The ultimate compressive strength was calculated for the stub columns base on steel design code GB50018-2002. For all the cut stub columns, the failure modes of the two flanges were obvious distortional mode, while the webs were local buckling failure. The testing compressive ultimate strength was only 83%-89% of code calculation value.
URI: http://hdl.handle.net/10397/10210
ISSN: 1000-2405
EISSN: 1671-4431
Appears in Collections:Journal/Magazine Article

Access
View full-text via PolyU eLinks SFX Query
Show full item record

SCOPUSTM   
Citations

2
Last Week
1
Last month
0
Citations as of Sep 17, 2017

Page view(s)

59
Last Week
3
Last month
Checked on Sep 25, 2017

Google ScholarTM

Check



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.